We will be offering preseason prices , keep looking for booking specials
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Troybilt 21hp Super Bronco Only $1250.
We are A New Snapper Dealer, Lets make a deal
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LAST 48" HYDRO MTD PRO IN STOCK ONLY $3495
Picture is of 36"
|
Hand Held Blower Only $149/ Sold Out
*Measured at end of pipe. **Measured at the housing. +With standard pipes. ++Tube-Mount Throttle +++Hip-Mount Throttle |
*Measured at end of pipe. **Measured at the housing. +With standard pipes. ++Tube-Mount Throttle +++Hip-Mount Throttle |
Rider End Of Season Sales
HUSQVARNA Chainsaws sales and service
SOME PRICES CAN CHANGE WITHOUT NOTICE< CALL FIRST ON GENERATORS AND COMPRESSORS
|
|
|
|
||||
|
||||
Automatic Back-up Power • Instantly senses when power fails and starts in seconds Indefinite Power Supply • Runs off LP or Natural Gas - no gas cans to fill, store and refill Continuous Power • Generates electricity until utility power is restored Quiet Operation • Sound-absorbing panels and muffler keeps sound down |
| MODEL NUMBER | 1938 |
| ENGINE | Briggs & Stratton Extended Life Series OHV |
| HORSE POWER | Not Available |
| VOLTAGE/FREQUENCY | 120/240 Volts / 60 Hertz |
| SOUND OUTPUT | Not Available |
| ELECTRIC START | Battery & Float Charger Included |
| FUEL TYPE | LP or Natural Gas |
| COOLING SYSTEM | Air- & Oil-Cooled |
| LIMITED WARRANTY | 2 Years |
| WEIGHT | 280 Lbs. |
| DIMENSIONS | 30-1/2"L x 22-1/2"W x 32-1/2"H |
Automatic Transfer Switches Briggs & Stratton offers 50-Amp transfer switches (sold separately) that supply power to 10 circuits, which covers most applications. 100-amp and 200-amp versions are also available. While they cover all circuits, this is not always necessary. |
|
|
||||
|
| MODEL NUMBER | 1938 |
| ENGINE | Briggs & Stratton Vanguard |
| HORSE POWER | 570cc |
| VOLTAGE/FREQUENCY | 120/240 Volts / 60 Hertz |
| SOUND OUTPUT | 70 dB(A) @ 23 Feet |
| ELECTRIC START | Battery & Float Charger Included |
| FUEL TYPE | LP or Natural Gas |
| COOLING SYSTEM | Air- & Oil-Cooled |
| LIMITED WARRANTY | 3 Years/1500 Hours |
| WEIGHT | 379 Lbs. |
|
|
||||
|
||||
Automatic Back-up Power • Instantly senses when power fails and starts in seconds Indefinite Power Supply • Runs off LP or Natural Gas - no gas cans to fill, store and refill Continuous Power • Generates electricity until utility power is restored Quiet Operation • Sound-absorbing panels and muffler keeps sound down |
| MODEL NUMBER | 1815 |
| ENGINE | Briggs & Stratton Vanguard V-Twin |
| HORSE POWER | 627cc |
| VOLTAGE/FREQUENCY | 120/240 Volts / 60 Hertz |
| SOUND OUTPUT | 70 dB(A) @ 23 Feet |
| ELECTRIC START | Battery & Float Charger Included |
| FUEL TYPE | LP or Natural Gas |
| COOLING SYSTEM | Air- & Oil-Cooled |
| LIMITED WARRANTY | 3 Years/1500 Hours |
| WEIGHT | 379 Lbs. |
|
|
Automatic Transfer Switches Briggs & Stratton offers 50-Amp transfer switches (sold separately) that supply power to 10 circuits, which covers most applications. 100-amp and 200-amp versions are also available. While they cover all circuits, this is not always necessary. |
|
Professional Installation Required! The Briggs & Stratton 12 kW Automatic Standby Generator System must be installed by a licensed professional, who must acquire the appropriate permits and comply with local building codes. Contact your local electrician for installation costs. |
|
 |
Dash
Panel Superb front visibility for accurate trimming. Reverse levers allow precise backing in tight areas. Throttle and control levers can be operated without removing hands from the handlebar. Control levers are padded and gauges are easily visible while protected by the handlebar. Standard hour meter for accurate record keeping. Ammeter standard on electric start models. |
|
Pump Controls Pump controls return to neutral automatically when hand-control levers are released for dynamic braking and eliminate the need for hand-held safety levers. Independent neutral adjustment knobs are easily accessible. Control-to-pump linkage is double clamped and double bolted for fail-safe reliability. |
 |
 |
Discharge Opening
3/4" thick buttress plate at front of opening and deck skirt reinforced at front and rear by two layers of 3/16" steel welded in a triangular shape resists damage where others tend to crack. Grass Gobbler™ requires no bracket. Wide discharge opening ensures an aerodynamic path for catching. This catching system is a result of over a decade of experience building catchers. |
|
Blade Belts / Deck Cover Large, B-section drive pulleys are cast iron with spokes and split-tapered hubs for cool running and long life. Greater belt wrap around blade pulleys reduces wear and slippage. Deck cover is supported on vibration-isolated posts for quiet operation and is held securely with only two knobs making it easy to remove and install. |
 |
 |
Rear
View with Both Pumps and Platform
Wide standing platform has operator presence system to shut off blades and engine automatically unless blade switch is in the off position. Blade brake positively stops blades in seconds. Anti-tip rollers improve safety. |
|
Underside of Cutter Deck and Clutch Deep cutter deck, high lift blades and Flare Flow™ deck channel for aerodynamic, high-output mowing. 100% 7 Ga. (3/16") steel deck with structured deck baffles resists flexing. Rounded trim-side of deck for closer trimming. Adjustable anti-scalp rollers on deck nose. Maintenance-free magnetic clutch/brake is designed for 28 hp with positive blade stop outperforming the smaller versions used on other mowers. |
 |
